Hp printer defaulting to manual tray Hague

hp printer defaulting to manual tray

[Solved] Outlook 2010 Printing to Wrong Paper Tray HP P2030 Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1.

HP Officejet Pro 8500A e-All-in-One Printer (A910n

HP ENVY 5640 5660 7640 Printers 'Photo Tray Problem. Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1., Tray 1 is closed. In order to print I have to push the ok to switch to tray 2 then it will print. It comes up this way each time. I have tried to manually change it as well as going into the printer properties. In the properities I have Tray 1 disabled but it doesn't stop it from defaulting back to tray 1. Any help would be appreciated. I have hundreds of people using this printer each day..

28/02/2017 · A common issue we see is your HP printer flashing "amber" and asking for paper to be loaded into tray 1 when there is already A4 loaded in your main paper trays… To print by source, select a specific tray for the product to pull from. If you select a tray that is configured for a type or size that does not match your print job, the product prompts you to load the tray with the type or size of paper for your job before printing it. When you load the tray, the product begins printing.

hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the CompactFlash card. HP LaserJet 4200, 4250, 4300 and 4350 Series printers Service Manual, HP 4250/4300/4350 series printer only)..253 Main motor..255 Pickup and feed. (pull to open) Tray 2 On/off switch Right-side panel (provides access to DIMMs. Hp Laserjet 4250 Manual Feed Off …

CompactFlash card. HP LaserJet 4200, 4250, 4300 and 4350 Series printers Service Manual, HP 4250/4300/4350 series printer only)..253 Main motor..255 Pickup and feed. (pull to open) Tray 2 On/off switch Right-side panel (provides access to DIMMs. Hp Laserjet 4250 Manual Feed Off … I just installed a printer for two users. It is connected via USB to one computer and shared through our network to the other user. Both users can print just fine, but anytime the user that is using the shared connection to the printer tries to print something out of Outlook 2010, it tries to print to tray 1 which is a manual feed paper tray which means the user must either press a button on

CompactFlash card. HP LaserJet 4200, 4250, 4300 and 4350 Series printers Service Manual, HP 4250/4300/4350 series printer only)..253 Main motor..255 Pickup and feed. (pull to open) Tray 2 On/off switch Right-side panel (provides access to DIMMs. Hp Laserjet 4250 Manual Feed Off … hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the

Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1. 29/01/2018В В· We have a Laserjet 700 on the network and any print jobs default to Tray 1. I've reviewed HP's documentation and it says if Tray 1 is configured for the Any Size paper size and the Any Type paper type settings and if the print job does not specify a tray, then the product prints from Tray 1, even if the paper size and type settings in the print job do not match the paper loaded in Tray 1.

- HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP Photosmart All-in-One Printers - The 'Photo Tray Spread the paper guides to the correct size, and then load paper in the tray. For information about how to orient the paper, see the Tray 1 paper orientation section in this document. Make sure that the paper fits under the fill-line on the paper guides.

1 Printer status The status line provides information about the overall printer status. 2 HP logo or Home button On any screen other than the Home screen, the HP logo changes to a Home button. Touch the Home button to return to the Home screen. 3 Stop button Touch the Stop button to pause the current job. The Job Status screen opens and Troubleshoot issues with how HP LaserJet P3010 series printers are feeding or outputting the paper. The product always prompts for manual feed, even if the tray is loaded. Open the tray, reload the media, and then close the tray. Or, change the manual-feed prompt setting to UNLESS LOADED, so that the product prompts for manual feed only when the tray is empty. The USE REQUESTED TRAY

Save this Book to Read hp printer defaults to manual feed tray PDF eBook at our Online Library. Get hp printer defaults to manual feed tray PDF file for free from our online library The printer doors, buttons, paper trays, and paper-width guides can be operated by users with limited strength and reach. For more information about accessibility solutions for HP products, visit the HP Accessibility and Aging

My C1525nw is supposed to automatically select tray 2 when tray 1 (single-sheet feed) is empty. The printer ALWAYS asks for paper in tray 1 before printing, or manual override on the control panel. Tried setting "manual feed" off/on - no change. I just installed a printer for two users. It is connected via USB to one computer and shared through our network to the other user. Both users can print just fine, but anytime the user that is using the shared connection to the printer tries to print something out of Outlook 2010, it tries to print to tray 1 which is a manual feed paper tray which means the user must either press a button on

28/02/2017 · A common issue we see is your HP printer flashing "amber" and asking for paper to be loaded into tray 1 when there is already A4 loaded in your main paper trays… My C1525nw is supposed to automatically select tray 2 when tray 1 (single-sheet feed) is empty. The printer ALWAYS asks for paper in tray 1 before printing, or manual override on the control panel. Tried setting "manual feed" off/on - no change.

My printer is defaulting to the multipurpose tray vs. the. Save this Book to Read hp printer defaults to manual feed tray PDF eBook at our Online Library. Get hp printer defaults to manual feed tray PDF file for free from our online library, Hi, I have LaserJet 4000 series, I set Tray 1 to cassette, that means, it should print from Tray 2 whenever Tray 1 is empty or close. but I get a message on the display screen: "Tray 1 Load plain A4", so the printer keeps asking for paper in Tray 1, how to solve this? Here are details of the probl....

Hp printer defaults to manual feed tray by o567 Issuu

hp printer defaulting to manual tray

Solved Printer doesn't recognize tray 2 as default HP. - HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP ENVY 5640, 5660, 7640 Printers - 'Photo Tray Problem, Troubleshoot issues with how HP LaserJet P3010 series printers are feeding or outputting the paper. The product always prompts for manual feed, even if the tray is loaded. Open the tray, reload the media, and then close the tray. Or, change the manual-feed prompt setting to UNLESS LOADED, so that the product prompts for manual feed only when the tray is empty. The USE REQUESTED TRAY.

hp printer defaulting to manual tray

P3005n defaulting to manual tray using hppi Hewlett

hp printer defaulting to manual tray

[Solved] Outlook 2010 Printing to Wrong Paper Tray HP P2030. HP Officejet Pro 8500A e-All-in-One Printer (A910n) - Printing from Paper Tray 2 in Windows Introduction This document contains steps for loading paper and for changing the print settings to print from Tray 2. I just installed a printer for two users. It is connected via USB to one computer and shared through our network to the other user. Both users can print just fine, but anytime the user that is using the shared connection to the printer tries to print something out of Outlook 2010, it tries to print to tray 1 which is a manual feed paper tray which means the user must either press a button on.

hp printer defaulting to manual tray


I just installed a printer for two users. It is connected via USB to one computer and shared through our network to the other user. Both users can print just fine, but anytime the user that is using the shared connection to the printer tries to print something out of Outlook 2010, it tries to print to tray 1 which is a manual feed paper tray which means the user must either press a button on The paper source settings or the tray settings change when you try to print a document in Microsoft Word. Note This behavior is not specific to Word. You may experience these symptoms in other programs such as Notepad, WordPad, and Microsoft Excel.

1 Printer status The status line provides information about the overall printer status. 2 HP logo or Home button On any screen other than the Home screen, the HP logo changes to a Home button. Touch the Home button to return to the Home screen. 3 Stop button Touch the Stop button to pause the current job. The Job Status screen opens and Hi, I have LaserJet 4000 series, I set Tray 1 to cassette, that means, it should print from Tray 2 whenever Tray 1 is empty or close. but I get a message on the display screen: "Tray 1 Load plain A4", so the printer keeps asking for paper in Tray 1, how to solve this? Here are details of the probl...

Tray 1 is closed. In order to print I have to push the ok to switch to tray 2 then it will print. It comes up this way each time. I have tried to manually change it as well as going into the printer properties. In the properities I have Tray 1 disabled but it doesn't stop it from defaulting back to tray 1. Any help would be appreciated. I have hundreds of people using this printer each day. If you set the manual feed tray to a paper type of envelope instead of the default of "ANY", then it will not just blindly default to the manual tray because the printer believes the manual tray is loaded with envelopes. You can still manually force the printer to use the manual tray in your application's page setup by forcing your settings to send to that tray.

1 Printer status The status line provides information about the overall printer status. 2 HP logo or Home button On any screen other than the Home screen, the HP logo changes to a Home button. Touch the Home button to return to the Home screen. 3 Stop button Touch the Stop button to pause the current job. The Job Status screen opens and 07/05/2017 · My printer is defaulting to the multipurpose tray vs. the tray below which is loaded with paper. I go to print and it says I have no paper so i have to manually put a piece in the other tray its trying to pull from. Technician's Assistant: What's the make and model of the printer…

- HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP ENVY 5640, 5660, 7640 Printers - 'Photo Tray Problem HP Officejet Pro 8500A e-All-in-One Printer (A910n) - Printing from Paper Tray 2 in Windows Introduction This document contains steps for loading paper and for changing the print settings to print from Tray 2.

hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1.

hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the 07/05/2017 · My printer is defaulting to the multipurpose tray vs. the tray below which is loaded with paper. I go to print and it says I have no paper so i have to manually put a piece in the other tray its trying to pull from. Technician's Assistant: What's the make and model of the printer…

hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the I just installed a printer for two users. It is connected via USB to one computer and shared through our network to the other user. Both users can print just fine, but anytime the user that is using the shared connection to the printer tries to print something out of Outlook 2010, it tries to print to tray 1 which is a manual feed paper tray which means the user must either press a button on

hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the HP Officejet Pro 8500A e-All-in-One Printer (A910n) - Printing from Paper Tray 2 in Windows Introduction This document contains steps for loading paper and for changing the print settings to print from Tray 2.

- HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP ENVY 5640, 5660, 7640 Printers - 'Photo Tray Problem The paper source settings or the tray settings change when you try to print a document in Microsoft Word. Note This behavior is not specific to Word. You may experience these symptoms in other programs such as Notepad, WordPad, and Microsoft Excel.

hp printer defaulting to manual tray

- HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP ENVY 5640, 5660, 7640 Printers - 'Photo Tray Problem 1 Printer status The status line provides information about the overall printer status. 2 HP logo or Home button On any screen other than the Home screen, the HP logo changes to a Home button. Touch the Home button to return to the Home screen. 3 Stop button Touch the Stop button to pause the current job. The Job Status screen opens and

P3005n defaulting to manual tray using hppi Hewlett

hp printer defaulting to manual tray

Hp printer defaults to manual feed tray by o567 Issuu. At our office, our HP printer would default to manual tray if there was a conflict between selected tray and paper size. So, we either had to manually feed, or hit the Go button to make it choose the default tray (letter, tray 4). If all else fails, try deleting and reinstalling the printer driver., - HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP ENVY 5640, 5660, 7640 Printers - 'Photo Tray Problem.

The paper source settings or tray settings change when you

My printer is defaulting to the multipurpose tray vs. the. To print by source, select a specific tray for the product to pull from. If you select a tray that is configured for a type or size that does not match your print job, the product prompts you to load the tray with the type or size of paper for your job before printing it. When you load the tray, the product begins printing., I just installed a printer for two users. It is connected via USB to one computer and shared through our network to the other user. Both users can print just fine, but anytime the user that is using the shared connection to the printer tries to print something out of Outlook 2010, it tries to print to tray 1 which is a manual feed paper tray which means the user must either press a button on.

To print by source, select a specific tray for the product to pull from. If you select a tray that is configured for a type or size that does not match your print job, the product prompts you to load the tray with the type or size of paper for your job before printing it. When you load the tray, the product begins printing. At our office, our HP printer would default to manual tray if there was a conflict between selected tray and paper size. So, we either had to manually feed, or hit the Go button to make it choose the default tray (letter, tray 4). If all else fails, try deleting and reinstalling the printer driver.

07/05/2017 · My printer is defaulting to the multipurpose tray vs. the tray below which is loaded with paper. I go to print and it says I have no paper so i have to manually put a piece in the other tray its trying to pull from. Technician's Assistant: What's the make and model of the printer… Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1.

My C1525nw is supposed to automatically select tray 2 when tray 1 (single-sheet feed) is empty. The printer ALWAYS asks for paper in tray 1 before printing, or manual override on the control panel. Tried setting "manual feed" off/on - no change. If you set the manual feed tray to a paper type of envelope instead of the default of "ANY", then it will not just blindly default to the manual tray because the printer believes the manual tray is loaded with envelopes. You can still manually force the printer to use the manual tray in your application's page setup by forcing your settings to send to that tray.

1 Printer status The status line provides information about the overall printer status. 2 HP logo or Home button On any screen other than the Home screen, the HP logo changes to a Home button. Touch the Home button to return to the Home screen. 3 Stop button Touch the Stop button to pause the current job. The Job Status screen opens and Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1.

HP Officejet Pro 8500A e-All-in-One Printer (A910n) - Printing from Paper Tray 2 in Windows Introduction This document contains steps for loading paper and for changing the print settings to print from Tray 2. 29/01/2018В В· We have a Laserjet 700 on the network and any print jobs default to Tray 1. I've reviewed HP's documentation and it says if Tray 1 is configured for the Any Size paper size and the Any Type paper type settings and if the print job does not specify a tray, then the product prints from Tray 1, even if the paper size and type settings in the print job do not match the paper loaded in Tray 1.

1 Printer status The status line provides information about the overall printer status. 2 HP logo or Home button On any screen other than the Home screen, the HP logo changes to a Home button. Touch the Home button to return to the Home screen. 3 Stop button Touch the Stop button to pause the current job. The Job Status screen opens and Hi, I have LaserJet 4000 series, I set Tray 1 to cassette, that means, it should print from Tray 2 whenever Tray 1 is empty or close. but I get a message on the display screen: "Tray 1 Load plain A4", so the printer keeps asking for paper in Tray 1, how to solve this? Here are details of the probl...

My C1525nw is supposed to automatically select tray 2 when tray 1 (single-sheet feed) is empty. The printer ALWAYS asks for paper in tray 1 before printing, or manual override on the control panel. Tried setting "manual feed" off/on - no change. To print by source, select a specific tray for the product to pull from. If you select a tray that is configured for a type or size that does not match your print job, the product prompts you to load the tray with the type or size of paper for your job before printing it. When you load the tray, the product begins printing.

Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1. At our office, our HP printer would default to manual tray if there was a conflict between selected tray and paper size. So, we either had to manually feed, or hit the Go button to make it choose the default tray (letter, tray 4). If all else fails, try deleting and reinstalling the printer driver.

Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1. At our office, our HP printer would default to manual tray if there was a conflict between selected tray and paper size. So, we either had to manually feed, or hit the Go button to make it choose the default tray (letter, tray 4). If all else fails, try deleting and reinstalling the printer driver.

I just installed a printer for two users. It is connected via USB to one computer and shared through our network to the other user. Both users can print just fine, but anytime the user that is using the shared connection to the printer tries to print something out of Outlook 2010, it tries to print to tray 1 which is a manual feed paper tray which means the user must either press a button on Tray 1 is closed. In order to print I have to push the ok to switch to tray 2 then it will print. It comes up this way each time. I have tried to manually change it as well as going into the printer properties. In the properities I have Tray 1 disabled but it doesn't stop it from defaulting back to tray 1. Any help would be appreciated. I have hundreds of people using this printer each day.

HP Photosmart All-in-One Printers The 'Photo Tray

hp printer defaulting to manual tray

Hp printer defaults to manual feed tray by o567 Issuu. - HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP ENVY 5640, 5660, 7640 Printers - 'Photo Tray Problem, Spread the paper guides to the correct size, and then load paper in the tray. For information about how to orient the paper, see the Tray 1 paper orientation section in this document. Make sure that the paper fits under the fill-line on the paper guides..

HP Officejet Pro 8500A e-All-in-One Printer (A910n. To print by source, select a specific tray for the product to pull from. If you select a tray that is configured for a type or size that does not match your print job, the product prompts you to load the tray with the type or size of paper for your job before printing it. When you load the tray, the product begins printing., Hi, I have LaserJet 4000 series, I set Tray 1 to cassette, that means, it should print from Tray 2 whenever Tray 1 is empty or close. but I get a message on the display screen: "Tray 1 Load plain A4", so the printer keeps asking for paper in Tray 1, how to solve this? Here are details of the probl....

All Printers store.hp.com

hp printer defaulting to manual tray

P3005n defaulting to manual tray using hppi Hewlett. hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the.

hp printer defaulting to manual tray

  • P3005n defaulting to manual tray using hppi Hewlett
  • HP Officejet Pro 8500A e-All-in-One Printer (A910n

  • Tray 1 is closed. In order to print I have to push the ok to switch to tray 2 then it will print. It comes up this way each time. I have tried to manually change it as well as going into the printer properties. In the properities I have Tray 1 disabled but it doesn't stop it from defaulting back to tray 1. Any help would be appreciated. I have hundreds of people using this printer each day. Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1.

    My C1525nw is supposed to automatically select tray 2 when tray 1 (single-sheet feed) is empty. The printer ALWAYS asks for paper in tray 1 before printing, or manual override on the control panel. Tried setting "manual feed" off/on - no change. If you set the manual feed tray to a paper type of envelope instead of the default of "ANY", then it will not just blindly default to the manual tray because the printer believes the manual tray is loaded with envelopes. You can still manually force the printer to use the manual tray in your application's page setup by forcing your settings to send to that tray.

    Tray 1 is closed. In order to print I have to push the ok to switch to tray 2 then it will print. It comes up this way each time. I have tried to manually change it as well as going into the printer properties. In the properities I have Tray 1 disabled but it doesn't stop it from defaulting back to tray 1. Any help would be appreciated. I have hundreds of people using this printer each day. Troubleshoot issues with how HP LaserJet P3010 series printers are feeding or outputting the paper. The product always prompts for manual feed, even if the tray is loaded. Open the tray, reload the media, and then close the tray. Or, change the manual-feed prompt setting to UNLESS LOADED, so that the product prompts for manual feed only when the tray is empty. The USE REQUESTED TRAY

    Troubleshoot issues with how HP LaserJet P3010 series printers are feeding or outputting the paper. The product always prompts for manual feed, even if the tray is loaded. Open the tray, reload the media, and then close the tray. Or, change the manual-feed prompt setting to UNLESS LOADED, so that the product prompts for manual feed only when the tray is empty. The USE REQUESTED TRAY - HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP Photosmart All-in-One Printers - The 'Photo Tray

    To print by source, select a specific tray for the product to pull from. If you select a tray that is configured for a type or size that does not match your print job, the product prompts you to load the tray with the type or size of paper for your job before printing it. When you load the tray, the product begins printing. Save this Book to Read hp printer defaults to manual feed tray PDF eBook at our Online Library. Get hp printer defaults to manual feed tray PDF file for free from our online library

    - HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here. - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals! hp-concentra-wrapper-portlet Actions ${title} Loading... HP ENVY 5640, 5660, 7640 Printers - 'Photo Tray Problem Troubleshoot issues with how HP LaserJet P3010 series printers are feeding or outputting the paper. The product always prompts for manual feed, even if the tray is loaded. Open the tray, reload the media, and then close the tray. Or, change the manual-feed prompt setting to UNLESS LOADED, so that the product prompts for manual feed only when the tray is empty. The USE REQUESTED TRAY

    Hi, I have LaserJet 4000 series, I set Tray 1 to cassette, that means, it should print from Tray 2 whenever Tray 1 is empty or close. but I get a message on the display screen: "Tray 1 Load plain A4", so the printer keeps asking for paper in Tray 1, how to solve this? Here are details of the probl... hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the

    hppi options for the 3005 allows defaulting the banner to tray 2 (the large main bin accessable from the front) but has no option I can find to make it the default job tray. How do I set it up to send all print jobs to tray 2? The user's print jobs are red-lighting the printer with a message in the Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1.

    To print by source, select a specific tray for the product to pull from. If you select a tray that is configured for a type or size that does not match your print job, the product prompts you to load the tray with the type or size of paper for your job before printing it. When you load the tray, the product begins printing. Printer set to auto select for paper worked fine picking up A4 paper from tray 2. Used tray one for an A5 printing job and now printer won't revert to tray 2 for normal A4 printing; keeps asking me to 'load tray 1 with A4'. tried turning off and on, fiddled with obvious settings but keeps coming back to tray 1.

    The printer doors, buttons, paper trays, and paper-width guides can be operated by users with limited strength and reach. For more information about accessibility solutions for HP products, visit the HP Accessibility and Aging HP Officejet Pro 8500A e-All-in-One Printer (A910n) - Printing from Paper Tray 2 in Windows Introduction This document contains steps for loading paper and for changing the print settings to print from Tray 2.